Italiano  Inglese  Francese  Cinese  Spagnolo  Portoghese

High pressure machine for polyurethane


ISOLTEC IT 3-6-9-12-15-18
# ISOLTEC IT 4P-8P
#

Tec Mac produces a wide range of high pressure machines for spraying, pouring and injection of bi-component materials such as polyurethane, polyurea, elastomers, adhesives, epoxy resin, phenolic resins and similar raw materials.

 

The ratio between the components can be fixed or continuously adjustable, with hydraulic or pneumatic driving, according to the needs.

 

The machine can be fitted with different mixing heads models, all self-cleaning, easy to use and light. The heads too, are hydraulically or pneumatically operated.

 

The thermostatization of the components is controlled till the head separately on each heating element and is effected by in line powerful heat exchangers and low voltage heating on the hoses.

 

All the units are fitted with pressure safety switches stopping the machine in case of overpressure in line (the maximum pressure set-point can be adjusted by the operator).

 

Moreover high pressure filters are mounted in line to stop possible impurities that could cause problems during the pouring.

 

All the units are built following the most severe quality and safety international standards.

 

The Isoltec machine can become a part of more sophisticated and complex plants for automatic pouring.

 

Tec Mac places his technical staff at customers' disposal to study and develop special units.

MAIN CHARACTERISTICS


Powerful in-line heat exchanger

#
In-line high pressure filter

#
Overpressure safety switch

#
High pressure heated hoses

#
Van

#
AP/X spraying/injection

#
Spraying/injection with the same head

#
AP/XA automated head

#
AP/SP static mixer

#
AP/RC pouring head

#

Vedi anche:


TEC MAC SRL Via Mattei 32, 28066 Galliate (NO) - ITALY
Tel. +39 0321 863163 / 864589 - Fax +39 0321 863163 - E-mail: info@tecmac.com
Copyright © TEC MAC srl. All Right's Reserved | P.Iva: 02215150034
Privacy | Powered by Gestim